Don’t rush it, you’ll finish it soon enough.

Biro drawing by Jon Tremlett for Soulcraftcandy.

So here’s a progress update on the biro ink drawing I’m working on at the moment. It’s coming along really well though it is taking quite a long time to complete. The thing is, you reach a point in a drawing where you really start to see how it will turn out, and inspired by this you open yourself to  an internal pressure to get it finished. This can be a good thing, you are energised to put in the effort but, it can also be a bad thing because if you’re not careful you rush things, and when that happens you make mistakes. Although it can often be a little frustrating at times it is always better for me in these situations to take a deep breath, take frequent breaks to take stock of the marks I’m making on the paper and accept the fact that slow is good, and that I’ll get to the end, one small step at a time. I’m having to be extra mindful with this one too. It is not a commission but a work based around a request, and the last thing I want to do is muck it up. I want it to be the best one I’ve done so far and as a result my internal pressure gauge is already off the scale!

Catch_me_detailJonTremlett2014

From this detail shot you can see I hope, how much pen work goes into these things, so you get an understanding of how important it is for me not to make mistakes. I spend a lot of time scribbling on a separate sheet to get the pen running right and my hand steady (I have a natural shakiness at close range). There’s a discipline to cross hatching, getting the tone and line direction consistent which requires huge concentration. Sometimes it just doesn’t work, the angle of the pen gives too much black or the pressure you’re using is too firm and at times like this you just have to step back, scribble on a loose sheet until you’re happy and then come back to it. No one ever said this was easy, so I try not to think that. In essence the greater the effort the greater the reward. Let’s see how I cope with the rest of it.

It’s never too late to finish something.

V-Bobber by ©JonTremlett 2014

While work on the “Catch Me” picture progresses and it moves slowly to its conclusion I thought I’d post a couple of other things in the meantime. For me it’s really important to have more than one work in progress at any one time, it helps to keep me inspired, assists in keeping my drawing hand active and my eye “in”, and most importantly of all, prevents me from getting bored.

So first up is this picture which some long term followers may recognise, it having made its first appearance on the blog about two years ago. Back then it was just a picture of a bloke on a bike, sat in the middle of an empty page, and since then it has sat in a drawer here waiting for me to finish it. Every now and again I’ve taken it out of the drawer, put some pencil lines in the background and promptly put it away again, unhappy with what I imagined would be a fitting background. I’d lost count of how many times this had happened. Here’s a link to that original post.

The other day though, something clicked, a penny dropped and I finally discovered what I wanted to do with it. Based on the idea that the guy riding the bike is going somewhere, I imagined him escaping the world he occupies during the working day, jumping on his bike and heading out somewhere better. It’s probably a context shared by many of us who wind up spending a great deal of our time in those slightly crumbling semi suburbs around the edges of cities, full of light industrial activity, crappy cafes and diners and run down buildings festooned with strange advertising hoardings. It puts a little back story behind the image and brings it to life a bit more. Why I hadn’t thought of any of this before escapes me. Creating this background reminded me that this is a great way to inject a bit of humour into a picture and include a level of detail that draws the eye to the image beyond the great big bike stuck in the middle of it. I’m so glad I did it this way and it has prompted a whole string of thinking about dealing with some other images I have failed to finish and are lying in a drawer waiting for their moment. I hope you like it too.

That’s more like it.

Pencil layout by Jon Tremlett 2014 for Soulcraftcandy

As I mentioned in the previous post, the composition of the first picture for Mr. C needed further work resulting in a bit of a redraw. It’s funny how it works sometimes. In your mind you’ve got this image that you think is what you want. Then you draw it out and it’s a million miles away from what you are actually after. So after staring at it for a good while you redraw, thinking that this is going to be a bit of a marathon, and “pop” out comes what you were looking for in the first place. This is not the first time this has happened, so I don’t waste any energy thinking every first rendition will be the right one.

So what you see above is the tightened version made from the blue pen sketch. I use my small home built light box for doing this. It’s essentially a tracing exercise where all of the details are positioned where I want them and I sort out the final angle projections for the wheels and stuff. The hardest bit is getting the position of the figure right, and this will often involve several bits of paper as I try and find the right one. For example, the lower leg and foot in this picture was particularly problematic, for some reason I just couldn’t “see” it. I have a Japanese made posable figure here which I use in situations like this, he’s a very useful piece of kit.

Police car by Jon Tremlett 2014

I also had to do a fair amount of work on the chasing police car down in the lower right hand corner. The one in the main picture here is a kind of modern version based on something they might use right now but, it doesn’t sit well with the overall feel I’m looking for. Something more retro was called for as I want to create a notional connection with the original age of the bad boy Cafe Racer. Searching the web, as you do, turned up some fabulous old pics of what we would call here in the UK, Jam Sandwiches and Panda cars. Just like all modern societies we seem to relish the opportunity to give anything to do with law enforcement a nickname. So the force, “Plod” would drive “jam sandwiches”, essentially white cars with a dirty great red stripe down the side. These superseded the “Panda” cars which were oddly light blue with white doors and very slow. I digress. The other picture here today is my final choice for the police car. An early “Jam Sandwich” of the Triumph 2000 variety, suitably festooned with period accessories including the big illuminated box on the roof (a massive air brake), crappy roof mounted spots and a great big siren mounted in the middle of the bonnet to aid engine cooling. It takes me back to my youth tearing about the neighbourhood on my old Yamaha avoiding these characters.

From here there follows another light box session to transfer this onto Bristol Board ready for the final step which is the biro inking stage, which oddly I’m looking forward to a great deal as I haven’t done one of these for some time. I’ll keep you posted on how it goes, and thanks for dropping by today.

When you’re unsure, redraw.

Sketch by Jon Tremlett for soulcraftcandy 2014

Ok, so there’s been a bit of a gap between this and the last post, I’ve been working, putting in some serious time on a freelance job, one which involved constructing a couple of full sized mock ups of some new airline seat concepts, in polyboard. For those of you who don’t know, polyboard is that stuff that folk normally use for presentations, a couple of sheets of very thin card with a foam core. It’s great for what it was designed for but, it also makes a great modelling material provided you know what you’re doing. I’ve been making models out of this stuff for longer than I care to remember so it presents few challenges as such, the main obstacle these days is that the forms that are created in CAD by the designers are so complex that we are now operating well beyond what a basic sheet material can achieve.

Polyboard_model1

Fortunately there are ways around this, including software that essentially creates complex nets for making paper models, which can be utilised to assist in turning curved surfaces into flat plates that one can cut, bend and glue together. It’s hard work, but becoming a skill fewer and fewer people possess, so there may be hope for me yet! Here’s a pic of the kind of thing I’ve been building. This is a very old model so no one will mind me showing it, the more recent stuff is, as usual, highly confidential so no pics of that for a few months at least.

Anyway, enough about work. Todays post is actually about this sketch above, the next stage in creating the drawings for Mr. C. After my initial efforts, see the relevant post here, it became obvious that what I wanted wasn’t anywhere near what I’d initially drawn so was beyond a quick set of modifications. Only one thing for it, redraw the whole thing. Not a problem, the learning and critique of the first sketches really informs your hand second time around so the process is more focused and as a result much better. What I do find though is that I can’t force this part of the process, it has to happen when the mood takes rather than when sitting down and telling oneself to get on with it. Needless to say the use of the magic blue biro helps as well, laying gentle lines first and slowly building up. This is now much more what I’m after in terms of view angle, the position of the bike on the page, the curve of the road and where the police car is. This will now get transferred onto Bristol board for the final bit and I’m already thinking I should do another version in tandem which shows a motorcycle which is closer to the kind of bike Mr.C constructs using four cylinder engines. More very soon, and thanks for taking the time to read the post today.

It feels good getting back in the saddle.

SC_Sketch_1©JonTremlett2014

Wow, it’s been two months since the last post!  I don’t for a moment think that that is a good thing but, the time has now passed so there’s little point worrying about it. Summer is always a busy time and this year is no exception, though I would have preferred it if one of the things that’s been happening in the meantime wasn’t the premature termination of my working contract. Hey ho. At least I wasn’t fired, I just became the resultant collateral damage of a major falling out between other parties who couldn’t resolve their differences. Such is the unpredictability of freelance working I suppose, and something that we all have to get used to by necessity rather than choice. As you can imagine, finding the next thing to do is a challenge which drags me away from keeping my blog up to date.

But enough about that. Today the creative itch has finally got the better of me and sketches have been scanned, paper has been stretched and the need to draw is whispering in my ear. So, what am I going to work on next?

SC_Sketch_2©JonTremlett2014

Some time ago, far too long to be considered as recently, I was contacted by a guy in California, a certain Mr Steve Carpenter, who has made a very successful business out of building cafe racers for select customers. He wanted to know if we could do something together. I said yes, of course, the guy’s a very respected builder and a very creative chap. I feel rather honoured to be asked, frankly. So my next project is to create some specific artworks for Steve in my black biro style, based around some ideas we’ve talked about.

So here are a couple of initial sketches, done in blue pen on newsheet, which are my first attempts at capturing what Steve and I have chatted about. I think you can get the gist of what we’re thinking from the images. These two are first thoughts and are not yet exactly what I’m after. There are a stack of post-it notes here covered in notes about what I want to change about them, I find this the best way to document my thoughts and satisfy my inner editor, so the final image will be different. But these are a solid start in trying to capture the feeling I’m after and get a feel for the overall “shape” of the picture I want to create. Mr. C knows I do this as a hobby, so he’s not applying any pressure, I’m very capable at doing that myself (!), but looking at these sketches today and reading through the notes makes me want to get on with it and rev up the creative engine again.

It’s good to be back.

Shotgun drag bike – the finished picture.

107_Shotgun©JonTremlett2014

Now that the finished picture is finally with its new owner, it’s the right time to post it here on the blog. It would have been unfair on Nik to put the finished picture up before he’d had a chance to see it in the flesh. Needless to say he had a very big smile on his face when he unwrapped the parcel, a moment that gave me great satisfaction and a fitting end to a project that has been utterly enjoyable to do, and has left me feeling that this could very well be the best picture I’ve done to date. So brilliant to get something just right. I think he’s going to hang it in his living room which makes me very proud and is rather flattering to be honest.

The front fairing was, in time honoured tradition, pretty much the trickiest part to complete in colour. As I hinted in the previous post, these intense liquid colours come with their own set of particular limitations, namely their ability to “blend” across larger areas and around complex details. Getting the red to “flow” around all of the lettering involved lots of quick brush work, letting things dry and using very diluted tints laid over each other. It took quite some time, but the result looks great in the context of the overall picture. We’d agreed that the bike would sit alone on the background and so the finishing touch was just to put the thick black line under the wheels and sign it. Job done.

108_Shotgun_B&W©JonTremlett2014

Nik had also asked me to do him a smaller black and white drawing that he could use for t-shirts and cards. I chose a simple elevational view for this one, and the dot shading technique I’ve used on a couple of previous pictures seemed the best way to go. As I’ve said before, this is a rather time consuming way to apply shade to a drawing but it does give the finished thing a look which is very distinct and crisp.

With these two done it’s time to delve into the unfinished projects drawer and pull out a couple of sketches that have been on the back burner for some time now. There’s also the possibility that I’ll do another picture of the Shotgun, perhaps a partial drawing from another angle. I’m undecided at present but will post up how I get on with both of these options soon.

Shotgun drag bike – slowly the bike emerges from the paper.

Shotgun_greys©JonTremlett2014

In a continuation from the previous post, here are some further images charting the progress of the Shotgun drag bike picture. In this first one I’m still very much in the process of laying down the grey tones, and as you can see this pretty much covers most of the parts of this bike, including the tyres, which are not painted red. As I mentioned previously this is very much a process of laying on tone and building up to the desired intensity in small steps. Most people who’ve ever rendered anything will tell you that true black doesn’t really exist, and they’d be right. But with this style of drawing or painting I like to create areas of absolute black as they help give the image punch and underline the more cartoonish nature of the final picture. So where possible it’s good to get those bits done at this stage too.

Shotgun_frame1©JonTremlett2014

In this second image you’ll see that I’ve completed the exhaust pipes having finished with the greys, before starting on the frame colour. Exhaust pipes, especially chromed ones are a lot of fun to do, but they do rely on you having some decent reference material to work from. In this case there was plenty going on in the photograph, so the reflections are quite colourful and intricate. The engine, and therefore the near vertical exhaust pipe too, provide a real central anchor point for the picture and the reflections really help to draw the eye to the focal point of the image.

Shotgun_frame2©JonTremlett2014

This final image shows the picture with the frame pretty much done. Again, this was a process of laying down slightly diluted tones of the red colour in steps, slowly building the colour up giving the frame tubes their form and highlight areas as you go. I took some time to get the base red right, mixing scarlet and orange inks to obtain something with the right amount of vibrancy. Diluted this gave a lovely pink for the lighter areas and with a bit of dark rich brown mixed in created a great tone for the shadows. It can be a bit nerve wracking when working with such strong colour as the last thing you need is to smear it across an area where it’s not wanted, or worse, get a small droplet landing on your pristine white surround. Once this stuff is down, there is no way to get rid of it or cover it up. But taking your time and working slowly and methodically pays dividends, and allowing things to dry every few minutes is a good habit to get into.

By this stage the picture is really starting to jump off the page, the red frame bringing a whole new three dimensional feeling to the piece. Nearly there.