Tag Archives: Bike drawings

Cafe Racer No.6, finally.

Posted on by Soulcraftcandyman
Reply

Cafe Racer No.6

It’s raining, it must be June. Whilst the bad weather this weekend has done its best to put a massive dampener on anyone taking part in celebrating the Queen’s Diamond Jubilee, in my case it has succeeded in driving me indoors, away from the distractions of motorcycling and into the chair in front of my drawing table. Unable to feel the tug of a sunny afternoon and a spin on the 250, a final spurt of creative energy means that the final drawing in the Cafe Racer series is now complete. Why this drawing has taken so long to finish could have something to do with the fact that all spare time over the last week has been taken up by constructing, fitting and painting a new front gate and posts, and giving the front door a once over. It may also have something (more) to do with nerves. When a drawing gets to a critical stage it can often be the case that I approach completing the final details with some trepidation, messing it up at a late stage is a huge risk. Biro is a fantastic medium, but you can never ever erase it. Once it’s down, that’s it. But it’s done now and other projects can start to take shape while I learn to breathe again!

The second part of todays double header is another lining paper sketch that didn’t make the final selection. It’s nearly there but not quite, very much a case of “ close, but no cigar”.  I was attempting to show some speed in the image without resorting to ending up with a huge blur. Various elements of the figure trailing off into the slipstream left behind. It’s something I have seen others do much more successfully than I’ve managed in this case, so there is some work to be done to get it working and may very well benefit from being tried again using a different medium. It is something worth aiming for as the alternative is the rather obvious big blurry background, and I’m not quite in the mood for one of those just yet. I’ll post my experiments as I go so you’ll soon see how things are progressing.

 

 

The 250 build, nearing the end.

Posted on by Soulcraftcandyman
1

A slight diversion today as finishing the story of the 250 build is way overdue. So some words and pictures of painted bits, metal bits and a nice piece of leather.

 

With three coats of base black applied, a series of white stripes were then masked and added. Everything was left for a couple of days to harden up before a very fine rub over with extra fine paper prior to the lacquer going on. For reasons of cost more than anything I’d elected to use rattle can lacquer rather than 2-pack on all parts apart from the fuel tank, which would be treated to a good couple of coats of petrol resistant lacquer, again from a rattle can. In retrospect I wish I’d gone the 2-pack route but it made the whole paint phase way too expensive, the petrol proof stuff works well but has yellowed in places and was quite tricky to apply evenly. With the lacquer all hardened it was time for a good polish and I can’t recommend Autoglym Super Resin Polish enough. Fantastic stuff and everything was just so shiny shiny.

Two important pieces of metalwork remained to be fabricated as all the painted parts made their way onto the bike for the final assembly. I knew the area at the back of the seat needed tidying but hadn’t been able to do much about it without the seat so it was stroke of luck that the seat arrived back just in time from being recovered. The first task was to make a piece to shut off the open area between the new mudguard and the seat mounting assembly. this then wrapped over the seat mount and formed an infill sitting below the rear of the seat base moulding.As before I worked it all out with thin card first which meant I could create a pretty accurate template for marking and cutting the sheet steel which was cut flat and then bent up in the bench vice.

For ages I’d been wondering how to finish off the rear of the seat. Knowing that there would have to be some kind of cover plate didn’t seem enough, there needed to be something else in there to give a more finished look. The answer came to me out cycling one day when I spotted and old bicycle with a little pouch hung from the back of the saddle. I ventured onto the internet to see what I could find for motorcycles. As it turned out, not too much unless I wanted something that looked like it had fallen off the back of John Wayne’s horse, and tassels are definitely not my thing. Taking the bicycle route proved more fruitful and in a fit of extravagance I splashed out on this lovely little number from Brooks the saddle makers. I quickly made up an angle bracket to fix the panel to, mounted to the seat base, and again using some card drew around the profile of the seat and transferred it to another template for cutting. A couple of holes and two slots later I had a neat little cover panel that the pouch straps attached to directly.

 

With these two new parts painted black final assembly could continue apace, my deadline for borrowing the workshop was looming.

 

 

 

Cafe Racer No.6 – more progress.

Posted on by Soulcraftcandyman
Reply

Cafe Racer 6

While the urge to “ship” or complete any drawing or image is a strong one, it’s very much proving to be a case of “slowly, slowly, catchy monkey” with this one. Jacket and hands done, head and legs to follow, and then something to ground it. Pushing aside the daily distractions of everyday life to focus on a specific creative task, particularly when that task is not born of your normal world of deadline fueled rushing about, is a skill which all of us amateurs must constantly struggle with. I am no different. It is good to know though, that these periods of slow progress are more than balanced by highly productive phases when stuff just pours out of your head and hand, and across the page. these slower moments are also a great opportunity for reflecting on sketch work and ideas, learning new things, recharging the creative batteries and dabbling in other creative pursuits.It would be good to finish it off by the end of the week though.

Here above is another of the sketches done on lining paper a while ago whilst churning out ideas for the Cafe Racer series.I like the idea behind it but my execution of the idea went a bit off track which led to me not including it in the first series. Rather like with the previous sketch shown in the last post I managed to make a bit of a fudge of the front wheel and that kind of ran all the way up the front forks too. Must try harder. You’ll also notice, and fair dues if you haven’t, that the rider figure has a strange look about him. Amongst other things his nose is a tad weird and his chin’s gone the same way too. It’s only a sketch so one can’t be too critical but, these things matter if one is to learn from examining ones own work and improve things for the future. What works though is the bike, apart from the front bit of course. It has that solidity to it that I’m always looking for, a great big engine surrounded by a chunk of hefty engineering. Again this will likely get redrawn sometime in the future, perhaps in another medium, and much bigger even. certainly a contender for the pending file.