Creative decisions that are right for you.

Taking my time to find the right position.

Taking my time to find the right position.

Time to take a look at cutting and fitting the new rear mudguard. There is much talk in bike building circles about getting the stance of your bike right as a prerequisite for coming up with anything good looking. There is a school of thought that is very prevalent currently to have the line of the bike very flat. That’s to say, the visual line from the back of the seat running through the base of the tank to the front suspension should be pretty much parallel to the ground. Hence you see lots of bikes that are all starting to look the same and share the almost totally flat seat which is almost ubiquitous in its manifestation. This is all well and good if you’ve got the time, money and the need to go down this route. Personally I haven’t. As I’ve mentioned before, without resorting to large amounts of frame modification  (read expensive welding bills and jiggery) and spending a whole pile of cash on different suspension equipment, there’s not much one can do beyond a certain point. The creative challenge is therefore to move away from the standard look enough to create difference and come up with something that works with the proportions one is presented with. This can be a lot harder than you think, but it is possible on a very limited budget and is generally a case of taking ones time in positioning, cutting and mounting components. Once you’ve cut metal there’s very little you can do to rescue things, so it pays to exercise patience and adopt a methodical approach no matter how quickly you want the project to be completed.

Position set, holes drilled, just the light to mount.

Position set, holes drilled, just the light to mount.

Of course, what “looks right” is a purely subjective conclusion. Because these kinds of projects are pretty personal in their nature, the result must first be right for you, in your own eyes. That’s the most important thing really. Decisions you make in a build are always contextualised by a whole host of factors and compromises that one has had to deal with on the journey to the final outcome. Others may not like your final iteration but then invariably they have little knowledge of this context. As a maker, of anything, one has the luxury of knowing that you could change or modify things in future if the urge takes you, but it’s an option that you can reserve to exercise if you so choose.

When I first built this bike I made a pile of decisions about how it would look based how I felt about the life it would lead, about practical issues like comfort and durability as much as aesthetic considerations. I reserved the right to change things if I wanted to but generally didn’t feel the need to do much other than periodic tweaking. Now, some time later, it is time to make some changes  based on living with it and riding it for a few years. There are still certain things about the stance I can do little about, but these are not a problem. The bike started life as a factory custom and so caries with it some small legacies of that life which I’m happy to live with, like the long forks and the steep rake of the tank.

A rather blurry shot courtesy of my iPad, but you get the idea.

A rather blurry shot courtesy of my iPad, but you get the idea.

So here are some shots showing the process of getting the new rear mudguard (fender) sitting in the right place, at the right angle in the right way. Once I’d cut the bare rolled section I’d bought to roughly the correct length I spent ages with bits of foam, tape and cups of tea trying it in different positions to get the look I was after. Once I was happy I marked the mounting holes for drilling and returned to the shed for some hole making. The critical factor was getting enough section over the wheel without it looking overly long but still having enough curve available to support the light/plate assembly at the right angle. I didn’t think things had changed much until I held up the new piece next to the old one to see that I’d actually reduced the length by about 150mm, very satisfying.

The final shot shows the guard in place with the light mounted and everything else ready to go. The final piece of this refresh is painting the petrol tank, which I’m currently working on a design for and I’ll be posting about that very soon.

Advertisements

Advice and opinion, don’t confuse the two.

Instruments: before, big and busy. After, uncluttered and simple.

Instruments: before, big and busy. After, uncluttered and simple.

There is a big difference between advice and opinion. One serves to guide and promote discourse, and the other invariably confuses things and promotes argument. I learned the difference between the two a long time ago and am constantly reminded of that lesson. When seeking advice we are generally hoping to tap into the accumulated knowledge and experience of others whose judgement we trust. Opinion on the other hand is generally something that follows acting upon advice and is subjective, unless of course, the other person has misconstrued your original query, in which case you get a whole load of one when you wanted the other. When I’m engaged in making stuff I ask for advice, when I need it, from other makers I know, and I might canvas their opinion when I’ve finished what I’m doing, but not before.

New headlight brackets and new front indicator light mounts.

New headlight brackets and new front indicator light mounts.

If I’d followed all of the unsolicited “advice” I’d been given about how my bike should be, then I would have wasted a great deal of money and time on what is essentially a cheap form of transport. Working within an admittedly self imposed tight budget, and with time pressure to match, the solutions that interest me are those which are simple, relatively easy to execute and fit for purpose. It is with this in mind that I approach everything I do on this build and it helps to steer things clear of needless expense and wasted effort. One day I might build something more special but, for now I’ll work with what I’ve got. Sorting out the instrument area and the headlight would have been “better” if I’d totally stripped the bike of all electrics, cable drives and other bits, but that doesn’t clear the deck, it just opens up a whole new avenue of expensive solutions to a new set of problems. Working with what’s there meant splitting the clocks to allow cable drives to flex more freely and shorter light mounts to keep things close in and fairly tidy. The bundle of wiring needed to keep things working would stay, although shortened and repackaged. I’d bought some ‘P’ clips some time ago thinking they’d do for mounting the light on the forks and so put them to use. they work well enough for now though I may make replacements with a tighter fit later on. I drew up some side brackets on some graph paper (brilliant for laying out simple parts to scale) and transferred the design onto some aluminium alloy for cutting out. I made a new speedo mount based on what had been there before, but with a 20 degree offset and modified the mounting that came with the tachometer when I bought it, to bring it closer to the handlebar. All this allowed me to raise the light and split the clocks, and try to keep things as low as possible. By tilting the bars back further I was getting near to where I wanted the front to be. It looks a lot more sparse than before, but I’ll get used to it. And the natty little fly screen has gone.

I was very fond of it, but it had to go. A quick word about making those side brackets. Because I’d drawn them out on graph paper, it was easy to draw them again on alloy sheet, you remember all the numbers. I cut them out using a jigsaw, slowly, with a blade for metals at slow speed. I finished them off with hand files and drilled the holes with a hand drill. It takes time but not as long as you’d think and the result is pretty tidy once they’ve had a rub down with 600 grade wet and dry paper.

Here’s a canny bit of advice given to me by my father just before I started this: when filing soft metals, rub chalk along your files, it stops them from clogging. He was right, it did too. You can’t beat good advice. His opinion? Well, he didn’t have one, he’s waiting until I’ve finished to give me that.

Seize the moment.

Stripped and ready for action.

Stripped and ready for action.

The decision to get cracking on the bike coincided with two pieces of good fortune. First, work called just before I started on it to ask if I’d mind staying at home that week as there wasn’t enough work going through the studio to keep me busy. Regret that I wouldn’t earn any money that week was countered by the prospect of getting a fair crack of the whip on my bike build, so a reasonable result. Then, to my utter surprise, the weather turned unseasonably warm and sunny for about a week, perfect for fettling bits of metal out in the shed and garden. Having wrestled the bike into the back garden, no easy task given a very narrow access alley out back and the need to fit some much reduced width handlebars, the strip down was quick. Originally I’d built it in a way that would enable me to take it apart if I ever needed to and so was grateful for having made that decision. The work plan was front mudguard first, then the clocks and headlight area and finally the rear mudguard. After a quick once over and a clean it was time to get started.

Not bad, considering.

Not bad, considering.

I’d sketched out several solutions for mounting the front guard but, in the end opted for the simplest one which used two straps or hoops connecting the mounting holes on the fork legs with the guard mounted on top. Ok, not that elegant, but essentially all you need and adhering nicely to one of my general philosophies when approaching making anything, which is the KISS principal (Keep It Simple, Stupid). Due to the front forks having a leading axle arrangement, the mounting holes are off-set to the wheel centre so the straps needed to be of different lengths, and so I slotted the holes on the rear one to enable some positional adjustment when finally mounting the guard. Trimming the guard from the longer piece of rolled section I had was relatively easy, the tricky bit is joining it all together. For this you need to find the centreline of the guard, awkward on a thing that curves in two planes. My simple solution was to lie the piece on its side and establish the centreline as a height rather than a width, using a pen taped to an adjustable square. That done, it’s much easier to define the hole positions for your fixing screws or rivets to attach the mounting straps. Nothing worse than drilling holes only to find they’re in the wrong place. With the holes drilled I screwed the whole thing together using some M4 button headed screws and thread lock compound. Doing it this way allowed me to tighten things up just so, and minimise the risk of pulling the surface down onto the straps too much and dishing the top surface. The rolled mudguard blanks came with a polished finish but this is a nightmare to maintain, so the final thing was “brushed” with Scotchbrite before a treatment of anti-corrosion spray. Ok so far. Next up, the clocks and front light area.